Configuring Ntp Server - Epcom S04 S Series User Manual

SERIES SERIES
If a new alias of the device domain name is defined in the DVR, it will replace the old one registered on the server.
Register the device on the HiDDNS server.
1) Go to the HiDDNS website: www.hiddns.com.
2) Click
3) After registration is successful, use the account and password to log in.
4) In the DDNS Management System interface, click the Device Management tab on the left menu bar and
then click
Only lower-case English alphabet, numeric and '-' can be used in the alias of the device and the alias must be started with
letters of the lower-case English alphabet.
5. Click the Apply button to save and exit the interface.

9.2.3 Configuring NTP Server

Purpose:
A Network Time Protocol (NTP) Server can be configured on your device to ensure the accuracy of system date/time.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
Select the NTP tab to enter the NTP Settings interface.
2.
89
Figure 9.9 HiDDNS Settings Interface
to register a user account if you do not have one.
Figure 9.10 Register an Account
to register the device.
Figure 9.11 Register the Device
POWERED BY