Epcom S04 S Series User Manual page 18

POWERED BY
3.
Click the Next button to enter the Date and Time settings window, as shown in Figure 2.4.
Set the time zone, date format, system date and system time.
4.
Click Next button which takes you back to the Network Setup Wizard window, as shown in Figure 2.5.
Set the network parameters, including the NIC type, IPv4 address, IPv4 subnet mask, default gateway, etc. You can enable
the DHCP to automatically obtain an IP address and other network settings from that server.
18
Figure 2.3 Login Window
Figure 2.4 Date and Time Settings
SERIES SERIES