Playing Back By Event Search - Epcom S04 S Series User Manual

POWERED BY
Table 6.3 Detailed Explanation of Normal Playback Toolbar
Button Operation
Audio on/
/
Mute
Add default
tag
Pause reverse
play/Re-
verse play/
/
Single-frame
reverse play
Video search
Video type
bar
 Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate special frames.
 About video type bar:
sents smart search recording.

6.1.4 Playing Back by Event Search

Purpose:
Play back record fi les on one or several channels searched out by restricting event type (motion detection or alarm input). Channel
switch is supported.
Steps:
1. Enter the playback interface.
Menu>Playback
2. Select Event tab to enter the Event Playback interface.
3. Select Motion or Alarm Input as the event type.
4. Set the start time and end time of the record fi les.
5. Select the camera (s) for searching.
6. Click Search button to enter the Search Result interface.
The Pre-play and post-play can be confi gured. The Pre-play refers to the time confi gured before the defi ned start time of event
search, and the Post-play refers to the time confi gured after the defi ned end time of event search. For example, when the start
time and end time of event search are set to 12:00:00 - 13:00:00, and the pre-play and post-play time is set to 30s and 20s
respectively, then the actual playback of event video fi le is 11:59:30 ~ 13:00:20.
52
Figure 6.13 Toolbar of Normal Playback
Button Operation
Start/Stop
/
clipping
Add customi-
zed tag
Pause play/Play/
Single-frame
/
play
Exit
represents normal recording (manual or schedule);
Figure 6.14 Video Search by Motion
Button Operation Button
30s forward
Tag manage-
ment
Stop
Hide
represents event recording (motion);
SERIES SERIES
Operation
30s reverse
Slow
forward
Fast
forward
Progress
bar
repre-