Configuring General Settings - Epcom S04 S Series User Manual

SERIES SERIES

Configuring General Settings

Purpose:
You can configure the BNC output standard, VGA output resolution, mouse pointer speed, etc.
Steps:
1. Enter the General Settings interface.
Menu > Configuration > General
2. Select the General tab.
3. Configure the following settings:
•
Language: The default language used is English.
•
CVBS Output Standard: Select the CVBS output standard to NTSC or PAL, which must be the same with the video
input standard.
•
Resolution: Select the HDMI/VGA output resolution, which must be the same with the resolution of the monitor
screen.
•
Time Zone: Select the time zone.
•
Date Format: Set the date format.
•
System Date: Select the system date.
•
System Time: Set the system time.
•
Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
•
Enable Wizard: Enable/disable the Wizard when the device starts up.
•
Enable ID Authentication: Enable/disable the use of the login password.
4. Click the Apply button to save the settings.
1.2
121
Figure 13.1 General Settings Interface
POWERED BY