Epcom S04 S Series User Manual page 26

POWERED BY
moving the sliding bar or increasing/decreasing the value.
The adjustable value range is 0~255 for the brightness, contrast, saturation and hue, 0~15 for the sharpness level and 0~5
for the denoising level.
4. Copy image parameters.
1) If you want to copy the image parameters of the current camera to other camera (s), click the Copy button to enter the
Copy to interface:
2) Select the camera (s) to be configured with the image settings. You can also click the checkbox of Analog to select all
cameras.
3) Click the OK button to finish the Copy settings.
You can click the Restore button to restore the current image settings to default parameters.
26
Figure 3.6 Copy Image Settings to Other Camera (s)
SERIES SERIES