Checking Hdd Status - Epcom S04 S Series User Manual

SERIES SERIES

10.3 Checking HDD Status

Purpose:
You may check the status of the installed HDD on device so as to take immediate check and maintenance in case of HDD failure.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General
2. Check the status of each HDD which is displayed on the list. Check the status of each HDD which is displayed on the list.
If the status of HDD is Normal or Sleeping, it works normally. If the status is Uninitialized or Abnormal, please initialize the HDD
before use. And if the HDD initialization is failed, please replace it with a new one.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the System Information interface.
Menu > Maintenance > System Info
Click the HDD tab to view the status of HDD displayed on the list.
2.
103
Figure 10.7 View HDD Status (1)
Figure 10.8 View HDD Status (2)
POWERED BY