Group Identifier - Avaya 1600 Series Installation And Maintenance Manual

Group Identifier

Use the following procedure to set or change the Group Identifier.
Note:
Note:
While the deskphone is on-hook and idle, press the following sequence of keys on the faceplate
of the deskphone:
Mute 4 7 6 8 7 (Mute G R O U P)
Note:
Note:
The following text displays left-justified at the top of the display:
Group=ddd
New=_
where ddd is the Group value.
1. Enter a valid Group value (0-999).
If a value different from the current Group value is entered, the following text displays
left-justified at the top of the display:
Save new value?
*=no
2. Press the * button to terminate the procedure, or the # button to save the new value.
If you press the # button, the following text displays:
New value
being saved
The new value is saved and the user interface is restored to its previous state.
http://ArtTel.ru
Perform this procedure only if the LAN Administrator instructs you to do so.
For more information about groups, see
Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons.
#=yes
The GROUP System Value
Issue 5 April 2014
Group Identifier
on page 57.
43