Group Identifier - Avaya one-X 1603SW Administrator's Manual

Note:
Press the Mute button momentarily. Do not press this button while pressing other
Note:
keys/buttons.
The following text displays left-justified at the top of the display:
Clear all values?
*=no
2. If you do not want to clear all values, press * (no) to terminate the procedure and retain the
current values.
A screen displays the following prompt on the top line:
Are you sure?
*=no
3. Press the * button to terminate the procedure without clearing the values. Press the # button
to clear all values to their initial default values.
A confirmation tone sounds and the following text displays left-justified at the top of the
display:
Clearing values.
The telephone is cleared to its "out of the box" state.

Group Identifier

Use the following procedure to set or change the Group Identifier.
Note:
Perform this procedure only if the LAN Administrator instructs you to do so.
Note:
For more information about groups, see
While the telephone is on-hook and idle, press the following sequence of keys on the faceplate
of the telephone:
Mute 4 7 6 8 7 (Mute G R O U P)
#=yes
#=yes
Local Administrative Options Using the Telephone Dialpad
The GROUP System Value on page 70.
Issue 1 June 2010 97