Avaya 1600 Series Installation And Maintenance Manual page 77

application file to replace the boot code. The following message displays while the
application file is downloaded into RAM:
app_filename
n KB received
where n is the number of KBs downloaded.
The following message displays while the application file is stored in flash memory:
Saving to flash
n%, x secs
where n is the percentage of the file stored, and x is the number of elapsed seconds. This
usually takes longer than the file download.
The following message displays while the deskphone is reset so the application file can be
executed:
While the boot code is rewritten, the deskphone displays:
Updating...
n%, x secs
where n is the percentage of boot code rewritten and x is the number of elapsed seconds
during rewriting.
When the new boot code is successfully written into the flash memory, the application
corrupts its own checksum stored in flash. The application then resets the deskphone so the
latest system-specific application file can be downloaded.
Continue with the next procedure.
http://ArtTel.ru
Restarting...
Scenarios for the Restart Process
Issue 5 April 2014 77