Boot File Needs to be Upgraded
The deskphone automatically downloads an upgraded boot file if applicable. In this case, these
messages appear:
The deskphone displays:
Restarting...
While the hardware is being initialized, the deskphone displays:
Initializing
While either the application file if there is one or the boot code is uncompressed into RAM,
the deskphone displays:
Loading: 5 secs
replboot_v3.app
This message counts the seconds as the application file (replboot_v3.app in this example)
is being written into RAM.
When control is passed to the software that was just loaded, the following messages
display:
Starting...
Updating boot code...
DO NOT UNPLUG THE PHONE!
This message continues while the new boot code is being written into RAM.
The deskphone displays the speed of the Ethernet interface in Mbps, that is, 0, 10, or 100.
The message No Ethernet displays until the software determines whether the interface is
10 Mbps or 100 Mbps.
http://ArtTel.ru
4084KB
Scenarios for the Restart Process
Issue 5 April 2014
75