Set The 802.1X Operational Mode; Change The Dot1X Mode Value - Avaya 1600 Series Installation And Maintenance Manual

Local Administrative Options

Set the 802.1X Operational Mode

Use the following procedure to set or change the operational mode.
1. While the deskphone is on-hook and idle, press the following sequence of keys on the
faceplate of the deskphone:
Mute 8 0 2 1 9 # (Mute 8 0 2 1 x #)
Note:
Note:
After entry of the command sequence, the following text displays:
802.1X=setting
*=change #=OK
where the setting is the current value of the system value DOT1X (802.1X Supplicant
Mode), defined as:
●
●
●
2. Perform one of the following steps:
●
●

Change the DOT1X Mode Value

Use the following procedure to change the DOT1X mode value.
1. To change the mode value, press *.
Depending on the current value, the next sequential valid mode value is selected and
displayed as the setting. For example, if the current value is pass-thru (0), pressing *
32 1600 Series IP Telephone Installation and Maintenance Guide
http://ArtTel.ru
Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons.
Pass-thru mode if setting = 0
P-t w/Logoff (pass-thru with Logoff) mode if setting = 1
Supplicant mode without pass-thru or p-t w/Logoff if setting = 2
If you want to change the DOT1X mode value, go to
page 32.
If you want to change the DOT1XSTAT mode value go to
Mode Value on page 33.
Change the DOT1X Mode Value
Change the DOT1XSTAT
on