Static Addressing Installation
The usual way to assign IP addresses to IP deskphones is the automatic method described in
Dynamic Addressing Process
assignment of IP addresses is desired.
CAUTION:
Use the following procedure to invoke manual address information programming.
1. Start manual address programming by performing one of the following steps:
a. During normal DHCP processing, press the * key while "* to program" displays during
b. While the deskphone is on-hook and idle, press the following sequence of keys on the
Note:
Note:
The deskphone displays:
Phone=nnn.nnn.nnn.nnn
New=_
where nnn.nnn.nnn.nnn is the current IP address system value of the deskphone.
2. Enter the deskphone's IP address followed by the # button.
The deskphone displays:
CallSv=nnn.nnn.nnn.nnn
New=_
where nnn.nnn.nnn.nnn is the current system value of the media server/gatekeeper IP
address.
http://ArtTel.ru
on page 24. There might be times, however, when manual
!
CAUTION:
Static addressing is necessary when a DHCP server is unavailable.
Because of the increased opportunities for text entry errors associated with static
addressing, we very strongly recommend that a DHCP server be installed and
static addressing avoided.
the DHCP process.
or
faceplate of the deskphone:
Mute 2 3 3 7 # (Mute A D D R #)
Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons.
Static Addressing Installation
Issue 5 April 2014
35