Signaling Protocol Identifier - Avaya 1600 Series Installation And Maintenance Manual

Local Administrative Options

Signaling Protocol Identifier

Note:
Note:
Use the following procedure to set or change the Signaling Protocol Identifier. A valid SIG
Protocol Identifier is either 0 (default), 1 (H.323), or 2 (SIP).
Note:
Note:
1. While the deskphone is on-hook and idle, press the following sequence of keys on the
faceplate of the deskphone:
Mute 7 4 4 (Mute S I G)
Note:
Note:
The deskphone displays the following text left-justified at the top of the display:
SIG=protocol
*=change #=OK
where protocol is the deskphone's signaling protocol (H.323, SIP, or default) corresponding
to the numeric identifier (1, 2, or 0).
2. To change the SIG value, press *.
Depending on the current value, the next sequential valid SIG value is selected and
displayed as the protocol. I.e., if the current value is SIP (2), pressing * changes the value to
0 (default). If the current value is H.323 (1), pressing * changes the value to 2 (SIP).
If a value different from the current Group value is entered, the deskphone displays the
following text left-justified at the top of the display:
Save new value?
*=no
3. Press the * button to terminate the procedure, or the # button to save the new value. If you
press the # button, the deskphone displays the following text:
New value
being saved
The new value is saved. All deskphones display the following text left-justified at the top of
the display:
Restart phone?
*=no
50 1600 Series IP Telephone Installation and Maintenance Guide
http://ArtTel.ru
This procedure is provided for future use only, and is not currently applicable to
Release 1.0.
Perform this procedure only if the LAN Administrator instructs you to do so.
Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons.
#=yes
#=yes