Avaya 1600 Series Installation And Maintenance Manual page 36

Local Administrative Options
3. Enter the Call server IP address followed by the # button.
The deskphone displays:
Router=nnn.nnn.nnn.nnn
New=_
where nnn.nnn.nnn.nnn is the current system value of the gateway/router IP address.
4. Enter the Gateway router IP address followed by the # button.
The deskphone displays:
Mask=nnn.nnn.nnn.nnn
New=_
where nnn.nnn.nnn.nnn is the current system value of the IP netmask.
5. Enter the IP netmask followed by the # button.
The deskphone displays:
FileSv=nnn.nnn.nnn.nnn
New=_
where nnn.nnn.nnn.nnn is the current system value of the HTTP/HTTPS server IP
address.
6. Enter the File server followed by the # button.
The deskphone displays one of the following texts, depending on the current setting of the
system parameter NVL2Q (802.1Q):
If NVL2Q is 0:
If NVL2Q is 1:
If NVL2Q is 2:
7. Press * to change 802.1Q to the next sequential value. For example, if the current value is 0
(auto) pressing * changes it to 1 (on) and if the current value is 2 (off), pressing * changes it
to 0 (auto).
The display is updated to show the current status of 802.1Q.
36 1600 Series IP Telephone Installation and Maintenance Guide
http://ArtTel.ru
802.1Q=auto
*=change #=OK
802.1Q=on
*=change #=OK
802.1Q=off
*=change #=OK