Table of Contents
Advertisement
Other Features
The Phone Passcode
Group
Conference Calls
38DHB0002UKDJ - Issue 3 (05/2001)
If the phone gives a loud pip, it requires you to dial its passcode. The
default passcode is 0000.
Wrong passcode entry more than 5 times results in the phone
becoming barred. Barred phones cannot access features requiring
passcode entry. They can make external calls but only to special
numbers, e.g. emergency numbers.
The requirement to enter the passcode for many phone functions
can be switched off, see "Phone Feature Passcode" on page 5.
To change the phone's passcode:
1. Lift the handset and immediately dial 0.
2. Broken dial tone: Dial 70 (passcode).
3. Loud pip: Dial the phone's 4-digit passcode.
You will then hear either:-
•
Continuous tone: Passcode wrong, replace the handset.
•
Single soft tone: Dial the new passcode.
•
Broken dial tone: Number okay, replace the handset to
finish.
The system can include your phone in a group (or even in several
groups). You can then take your phone in and out of group. When 'in
group', you may receive calls made to the group number. Going into
group switches divert all and no calls off.
The group's type sets which group members the system rings when
a call to the group arrives. The different types are rotary, collective,
sequential and longest waiting (see page 22).
To join/leave group:
1. Lift the handset and immediately dial 0.
2. Broken dial tone: Dial 40 (in group) or 41 (out of group).
3. Broken dial tone: Replace the handset to finish.
During a call, other extensions can add callers to create a
conference call. They can setup conferences including up to 64
parties(there are some limitations, consult your System Manager for
details). Standard phones cannot start or add calls to a conference
but can be included in a conference.
To exit a conference:
1. Replace the handset. This does not affect any other callers
involved in the conference.
Other Features – Page 17
INDeX 9.2 Standard Telephone User's Guide
Advertisement
Table of Contents
