Avaya 1600 Series Installation And Maintenance Manual page 37

8. Press the # button to continue the procedure without changing the displayed status of
802.1Q
The deskphone displays the following text:
VLAN ID=dddd
New=_
where dddd is the current system value of the 802.1 VLAN ID.
9. Enter a valid value between 0 and 4094 for the new value of the 802.1 VLAN ID.
The deskphone displays the following message:
VLAN test=ddd
New=_
where ddd is the number of seconds to wait for the DHCPOFFER on a non-zero VLAN.
10. Enter a valid value between 0 and 999 for the new value of the DHCPOFFER wait period.
The deskphone displays:
Save new values?
*=no #=yes
11. Press the # button to save the new values you entered.
The deskphone displays:
New values
being saved
Once the new values are stored, the deskphone is reset.
If a new boot program is downloaded from the HTTP server after you enter static
addressing information, you must reenter your static addressing information.
http://ArtTel.ru
Static Addressing Installation
Issue 5 April 2014 37