Updating Firmware Using Wi-Fi - 3D Systems CubePro 3D Printer User Manual

Up to 28.54cm(w) x 27.04cm(d) x 23cm(h)

Table of Contents

NOTE: Wait until the update has been completed.

WARNING: DO NOT POWER OFF OR DISCONNECT THE PRINTER FROM UTILITY POWER

DURING THE UPDATE PROCESS.

Press and release the touchscreen display

Updating Firmware Using WI-FI

To update the ﬁrmware using the wireless utility, the printer must be connected to a wireless network.

Select SETUP.

Navigate to the Advanced screen and select FIRMWARE.

Select WIFI.

ON/OFF button

and the display will restart.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the CubePro 3D Printer and is the answer not in the manual?