Table of Contents
Advertisement
PRINT JET TEMPERATURE CALIBRATION
New print jet extruders have temperature calibration values printed on a label attached to the
extruder. After replacing an extruder, the values for the new nozzle should be entered into the printer for
optimum printing results.
Procedure
1.
Select SETUP.
2.
Navigate to
CALIBRATION
3.
Select
JET TEMP
CALIBRATION.
4.
Select the nozzle assembly that was replaced. Select the T1 value and use the arrows to enter the appropriate T1 value found on the label adhered to the
new extruder.
5.
Select the T2 value and use the arrows to enter the appropriate value found on the label adhered to the new extruder.
and select it.
Hide quick links:
Advertisement
Table of Contents
