3D Systems CubePro 3D Printer User Manual page 110

3D SYSTEMS SUSTAINABILITY PROGRAM
By its very nature 3D printing is a sustainable technology empowering 3D Systems' printers to produce
affordable products one layer at a time using only the necessary amount of material required for each part
with near zero waste in an energy efficient process.
CubePro 3D printers use eco-friendly plastics that can be recycled, re-purposed or composted responsibly.
3D Systems invites all CubePro consumers to partner in creating a cleaner world, one printed part at a
time, by participating in the 3D Systems Sustainability Program.
Cartridge Recycling: Send your empty CubePro cartridges to either our USA or Germany location. Be sure to keep the address label that comes with each
cartridge for recycling.
Plastics Recycling: Send your used PLA and ABS printed parts to either our USA or Germany location. We will properly and responsibly compost, recycle,
and reuse your returned plastic parts as a renewable source to manufacture new cartridges, reducing both raw materials consumption and the waste
stream.
3D Systems is committed to continuously improve the sustainability of its 3D printing products. For
questions, feedback and suggestions, please contact cubify@cubify.com.
Send cartridges and plastics to:
3D Systems Corporation
333 Three D Systems Circle
Rock Hill, SC 29730
USA
3D Systems Cartridge Recycling Centre
c/o UPS SCS GmbH & Co. OHG
Biberweg 12
53842 Troisdorf
Germany
Please visit http://3dsystems.com/shop/info/sustainability
WARNING: IT IS THE RESPONSIBILITY OF THE USER TO DISPOSE OF ANY REFUSE
GENERATED BY THE USE OF THE CUBEPRO PRINTER IN A RESPONSIBLE MANNER
ACCORDING TO ALL LOCAL LAWS AND STATUTES.
Copyright © 3D Systems, Inc. All rights reserved. | Source URL: http://infocenter.3dsystems.com/cubepro/user-guide
for more information.