Build Settings - 3D Systems CubePro 3D Printer User Manual

BUILD SETTINGS

Build Settings
Print Mode
Layer Resolution
Print Strength
Print Pattern
Descriptions
Print Mode
Standard
Premium
Draft
Custom
Print Resolution
0.070
0.200
0.300
Print Strength
Hollow
Strong
Almost Solid
The software has four modes including 3 set
modes and one custom mode.
The detail and smoothness of a part.
The strength of the inner structure of a creation.
The design of the inner structure of a creation.
• Layer Resolution: 200um
• Print Strength: Strong
• Print Pattern: Diamonds
• Layer Resolution: 70um
• Print Strength: Strong
• Print Pattern: Diamonds
• Layer Resolution: 300um
• Print Strength: Strong
• Print Pattern: Lines
Custom allows the user to customize their print settings
• Great mode for parts requiring smooth surfaces
• Layer lines are not very visible in these parts
• Good mode for artistic parts with a smooth flow
• Not the best mode for fine detail
• Best mode for general printing and most compatible mode for a wide range of geometries
• Fine detail preservation for things like steeples, spires, sharp points, or thin walls
• A fast mode with thicker layers
• Good for large parts with minimal detail
• Fastest mode to produce a part
• Hollow has fewer outer surfaces and larger print pattern spacing
• Best for parts that will not be stressed
• Medium amount of outer surfaces and smaller print pattern spacing
• Best for parts that will have minimal physical abuse
• The most surfaces and the tightest print pattern spacing
• The most robust part
• Best for parts that will be stressed
Selection of the types of materials used
Raft and Support
to create rafts, supports and sidewalks.
Adjustments to print pattern fill and the
Advanced
creation shell.
Help Opens the help menu.