Restoring Roughness To The Print Pad - 3D Systems CubePro 3D Printer User Manual

Up to 28.54cm(w) x 27.04cm(d) x 23cm(h)

Table of Contents

RESTORING ROUGHNESS TO THE PRINT PAD

If the print pad is too smooth, the print material and glue may not adhere properly. Using the sandpaper

included in the toolkit, wipe the print pad diagonally across the print pad from corner to corner in both

directions. Rinse and thoroughly dry the print pad before installing it into the printer.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the CubePro 3D Printer and is the answer not in the manual?