Setting The System Name And Language - Avaya Scopia XT Series User Manual

The quick setup wizard guides you through many of the following basic configuration tasks:
Navigation
•

Setting the System Name and Language

•
Adjusting the Image Position
•
Configuring Basic Network Settings
•
Configuring Basic Gatekeeper Settings
Setting the System Name and Language
About this task
The first screen in the Quick Setup wizard enables you to define the name of your Avaya Scopia
Series, the country, and the menu language. The unit's name is displayed on the system's title bar and
to other meeting participants. For example, Hong-Kong, or 9th-Floor-Room, or NY-Office. There is
also a unicode system name to enable non-English characters, available on the web interface only. For
more advanced settings of the system name, see Deployment Guide for Avaya Scopia
After initial setup, you can modify these settings by selecting Configure > General from the endpoint's
menus, or from the web interface select Basic Settings > Preferences > General.
Before you begin
Access the quick setup wizard from the endpoint or web interface, as described in
Settings with the Quick Setup Wizard
Procedure
1. Define the name and language as described in
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
Figure 10: Accessing the Quick Setup
on page 17
on page 15.
XT Series on page 17.
on page 16
on page 18
on page 19
Table 2: Defining name and language of the
®
XT
®
XT Series.
Configuring Basic
Getting Started | 16