Configuring None Authentication For Console Login - HP A7500 Series Configuration Manual

Configuring none authentication for console login

Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see "Configuration
Configuration procedure
Follow these steps to configure none authentication for console login:
To do...
Enter system view
Enter AUX user interface view
Specify the none authentication
mode
Configure common settings for
console login
After the configuration, the next time you log in to the device through the console port, you are prompted
to press Enter. A prompt such as <HP> appears after you press Enter, as shown in
Figure 9 Configuration page
requirements."
Use the command...
system-view
user-interface aux first-number
[ last-number ]
authentication-mode none
—
29
Remarks
—
—
Required
By default, you can log in to the
device through the console port
without authentication, and have
user privilege level 3 after login.
Optional
See "Configuring common settings
for console login (optional)."
Figure 9.