Quick Reference - GE Druck ADTS 505 User Manual

Druck ADTS 505 User Manual
3.3

Quick Reference

KEY-PAD FUNCTION
Key/selection
F1-F6
ALT/Ps
SPEED Qc
EPR
ROC/RATE Ps
LEAK MEASURE/CONTROL Switches between measure mode (for leak testing) and control mode
RATE
GROUND
SETUP
HELP
0-9
-/000
CLEAR/QUIT
ENTER
DELETE
CLEAR/QUIT + DELETE =
the display shows the main pressure display (Leak Measure or Control mode) with
normal operation key functions.
Function and comments
Function keys for menus
Altitude (Aeronautical units) or Ps (pressure units)
Airspeed (Aeronautical units) or Qc (pressure units)
Engine Pressure Ratio (pressure units only)
Rate of Climb (Aeronautical units) or Rate of Ps (pressure units)
Rate of change of Pitot or Mach parameter, press parameter then RATE (read only)
Controls Ps to atmospheric pressure and Qc to zero both at current rates of change
Changes functions, limits and units, if [save/lock] pressed changes are permanent
Press HELP for further information on current selection/display
Number entry
Minus sign for first number entry 000 (thousand) if not first number of entry
Clear number entry - quit from menu, HELP screen or clear warning message
Complete number entry
Removes the last number or character entered
ABORT, all operations stop, the ADTS 505 restarts from a normal power-up
sequence, including safe equalising of pressures between the test set and the
connected system
100 / 120 / 230V ~ 50 / 60Hz 200VA
115V ~ 400Hz 200VA
T5.0A
250V
HBC
F 3-1 K
IGURE EY
- D
PAD AND ISPLAY
3 - 3
3
K0260 Issue No. 8