GE Druck ADTS 505 User Manual page 115

Druck ADTS 505 User Manual
Transferring <NEW AIRCRAFT.CSV>files from a PC to:
New .csv file test scripts can be tested for general syntax and screen formatting using the desktop PC utility
"ADTS 505 Remote" (DK250). This utility requires no external equipment connections to operate, available for
installation from the distributor.
Transferring Files using GE FileTransfer Utility
C : D
AUTION O NOT CONNECT THE POWER PACK
5)
WHEN IT IS CONNECTED BETWEEN THE
Connect the PC communications cable (Table 2-1, item 5)
into an available 9-way 'D' COM port on the PC and the
connector of the Advanced Hand Terminal.
Use the icon on the windows CE desk top to start the File
Transfer Utility.
T
o start the File Transfer Utility on the PC, double click the
icon, set the File Transfer Utility, click the
expand the Advanced Hand Terminal drive as shown:
the ADTS 505 Advanced Hand Terminal or ADTS 505
(Table 2-1, item 6)
ADTS 505
+
to
Notes:
1. Check which serial communications has been connected,
use the RS232 drop-down menu to set the PC
communications port (COM1 to COM 4). The system stores
this setting and automatically selects this port on the next
power-up.
2. Only files directly loaded to the AHT will be accessible in the
AHT menus. To be accessible from the ADTS 505 the files
must be also loaded in the ADTS 505. This requires a
different connection configuration see Figure 6-4.
TO THE PC COMMUNICATIONS CABLE
PC.
AND
+
6 - 35
(Table 2-1, item
6
K0260 Issue No. 8