Power-Up Displays - GE Druck ADTS 505 User Manual

Druck ADTS 505 User Manual
Power-up routine
•
Set the power supply switch to ON.
•
Check that the screen shows the correct display for a successful power-up.
Check:
¤ the pump operates.
¤ the power indicator lights
¤ air discharges through the water drain.
•
Connect the cable to the AHT communication connector on the ADTS 505.
•
Check that the screen shows the correct display.
•
Check that the ADTS 505 screens show the correct display messages.
Note: This Windows-based facility hides many of the normal features of Windows.
F 6-5 P - D
IGURE OWER UP ISPLAYS
6 - 21
6
K0260 Issue No. 8