Table of Contents
Advertisement
Druck ADTS 505 User Manual
4
MAINTENANCE
4.1
Introduction
This section details the maintenance tasks to be carried out by the operator. The
maintenance chart shows the maintenance tasks, the periodicity of each task and a code
referenced to the task detailed in 4.3.
Task
Inspect
Inspect
Test
Test
Calibrate
Replace
Clean
Service
Service
* Periodicity may change depending on usage and environment, refer to the Engineering Authority.
Waste Electrical and Electronic Equipment directive 2002/96/EC
Do not dispose of this product as household waste. Use an approved
organisation that collects and/or recycles waste electrical and electronic
equipment. For more information, contact one of these:
•
•
Code
A
Daily, before use.
B
Weekly
C
Before use.
D
Daily, before use.
E
Every 12 months *
F
As detailed in fault finding or when detailed after inspection.
G
Weekly *
1,000 hours recorded by the unit's operational timer or the
H
equipment running log.
3,000 hours recorded by the unit's operational timer or 1000 hours
J
recorded by pump operational timer or the equipment running log.
T
4-1 M
ABLE
our customer service department:
Contact us at www.ge-mcs.com
your local government office.
Period
C
AINTENANCE
HART
4 - 1
4
K0260 Issue No. 8
Advertisement
Table of Contents
