Druck ADTS 505 User Manual
Altitude Correction (Figures 6-2 and 6-3)
This function allows the altitude correction value to be changed. The display shows the
altitude correction value in the lower part of the display screen.
The altitude correction facility corrects for the pressure difference when the ADTS 505 and
the aircraft system or UUT are at different heights.
Enter the height difference between the aircraft system or UUT and the ADTS 505 reference
level. If the ADTS 505 front panel is vertical, use a reference level of the mid point on the front
panel. If the ADTS 505 front panel is horizontal, then use the reference level of the top of the
case. If the aircraft system or UUT is below the ADTS 505, enter the value as a negative
The units of altitude correction are the current aeronautical units.
LTITUDE CORRECTION ON
K0260 Issue No. 8
6 - 15