Download  Print this page

Setup; Set-up 1 Of 2; [display],[single, Dual, Quad, Hand Term] - GE Druck ADTS 505 User Manual

Data test set.
Hide thumbs


Druck ADTS 505 User Manual


Set-up allows access to secondary functions that do not have an assigned key and are not
part of the main menu.

6.3.1 Set-up 1 of 2

[Display], [Single, Dual, Quad, Hand Term]
In leak measure mode, after each parameter, the display shows "Leak Measure". In control
mode the display changes to Aim = after each parameter.
The display shows a single parameter. When set, pressing a key-pad function key, the
display changes the displayed parameter. The display will not change if RATE is pressed
when ROC/RtPs is displayed.
The display shows two parameters only one can be a rate. The display will not show RtCAS
and ROC/RtPs together and automatically changes to show CAS or ALT respectively. The
display highlights the last selected parameter.
The display shows four parameters, pressing a key-pad function key, changes a displayed
parameter and causes the display to highlight the last selected parameter.
Hand Term
This option has two display settings, see paragraph 6.4 for details.
6 - 11
K0260 Issue No. 8


Table of Contents

   Related Manuals for GE Druck ADTS 505

Comments to this Manuals

Symbols: 0
Latest comments: