Permission In Service Zone - LevelOne WHG-311 User Manual

6.2.2. Permission in Service Zone

Configure Group settings; go to: User Authentication >> Group.
A Group can be allowed to access one Service Zone or multiple Service Zones. Moreover, a Group can be applied
different Policies within different Service Zones. Remote VPN is considered as a zone, where clients log into the
system via remote VPN.

Zone Name: The name of Service Zones and Remote VPN.

Enabled: Select Enabled to allow clients of this Group to log into the selected Service Zones. For
example, the above figure shows that users in Group 1 can access network services via every Service
Zone as well as Remote VPN under constraints of Policy 1.

Policy: Select a Policy that the Group will be applied with when accessing respective Service Zones.

To Group Permission Configuration: The relation between Group and Service Zone is many to many;
every Group can access network services via more than one Service Zone, and meanwhile, each Service
Zone can serve more than one Group.
Click the hyperlink in the To Group Permission Configuration column to enter the Group Configuration
interface, which is based on the role of Service Zone, to configure the relation between Group and Service
Zone.
90