Wispr Attributes In Service Zone - LevelOne WHG-311 User Manual

5.6.3. WISPr Attributes in Service Zone

WISPr or Wireless Internet Service Provider roaming - Pronounced "whisper," WISPr is a draft protocol submitted to
the Wi-Fi Alliance that allows users to roam between wireless internet service providers, in a fashion similar to that
used to allow cell phone users to roam between carriers. A RADIUS server is used to authenticate the subscriber's
credentials.
To configure WISPr attributes in Service Zone, go to: System >> Service Zones >> WISPr Configuration.
If a RADIUS server has been configured, the WISPr attributes used during RADIUS authentication can be defined
here in this Service Zone.

WISPr Smart Client: Select Enable if you wish to allow customers with a roaming account from a WISPr
agent (iPass, WiFi Skype, Boingo, and etc.) to access your internet. Make sure to Enable the HTTPS
Protected Login field under System >> General in order for roaming software on the client's device to
work properly.

Smart Client Black List: Fill in the WISPr agent names and enable to block users from that particular
WISPr roaming agent to access your internet. For example, if you fill in "ipassconnect" the iPass clients
will be denied roaming access in your network.

WISPr Location ID: These attributes, which enable wireless hotspot providers to customize their web
portals, are based on the client device location and are RADIUS vendor-specific attributes (VSAs).

WISPr Location Name: These attributes, which enable wireless hotspot providers to customize their
web portals, are based on the client device location and are RADIUS vendor-specific attributes (VSAs).

WISPr Billing Time: Set RADIUS account billing time.
51