Routing - LevelOne WHG-311 User Manual

7.1.2. Routing

 Specific Route Profile: Click the button of Setting for Specific Route Profile, the Specific Route Profile
list will appear.
7.1.2.1 Specific Route
 Specific Route Profile: The Specific Default Route is use to control clients to access some specific IP
segment by the specified gateway.
Destination / IP Address: The destination network address or IP address of the destination host.
o
Please note that, if applicable, the system will calculate and display the appropriate value based on the
combination of Network/IP Address and Subnet Mask that are just entered and applied.
Destination / Subnet Netmask: The subnet mask of the destination network. Select
o
255.255.255.255(/32) if the destination is a single host.
Gateway / IP Address: The IP address of the gateway or next router to the destination.
o
7.1.2.2. Default Gateway
 Default Gateway: The default gateway of WAN1, WAN2, or a desired IP address can be defined in each
Policy except Global Policy. When Specific Default Route is enabled, all clients applied with this Policy will
access the Internet through this default gateway.
Enable: Check Enable box to activate this function or uncheck to inactivate it.
o
Default Gateway: It may be WAN1 Default Gateway, WAN2 Default Gateway or to specific an IP
o
Address, if you select IP Address, you may need to fill the IP address of the gateway.
104