Manually Add Ap - LevelOne WHG-311 User Manual

10.2. Manually add AP

Add an individual Access Points to the managed list; go to: Access Points >> Enter Wide Area AP Management
>> Adding.
Besides Discovery feature that can search and list multiple APs for adding to the management list, Adding page
allows administrator to directly add a single Access Point to the management list. Simply configure the devices IP
address, name and login credentials, set a SNMP community string and click the Add button.

Device Type: The device type of Wide Area APs.

Device IP: The IP address of the AP to add to the management list.

Device Name: The mnemonic name given to this AP device.

Login ID: The Device's management interface login name.

Password: The Device's management interface login password.

SNMP Community: The SNMP Read Community string used for status access.
153