Table of Contents
Advertisement
11.2. Virtual Server
Configure Virtual Server; go to: Network >> NAT >> Public Accessible Server.
This function allows the administrator to set virtual servers, so that client devices outside the managed network can
access these servers within the managed network. Different virtual servers can be configured for different sets of
physical services, such as TCP and UDP services in general. Enter the "External Service Port", "Local Server IP
Address" and "Local Server Port". Select "TCP" or "UDP" for the service's type. In the Enable column, check
the desired server to enable. These settings will become effective immediately after clicking the Apply button.
171
Advertisement
Table of Contents
