12.6. Backup / Restore and Reset to Factory Default
Configure Backup / Restore and Reset to Factory Default; go to: Utilities >> Backup & Restore.
This function is used to backup/restore the WHG CONTROLLER settings. Also, WHG CONTROLLER can be
restored to the factory default settings here.
Backup System Settings: Click Backup to create a .db database backup file and save it on disk.
Restore System Settings: Click Browse to search for a .db database backup file created by WHG
CONTROLLER and click Restore to restore to the same settings at the time when the backup file was saved.
The option of "Keep WAN1 setting and Management IP Address List" can be selected to retain WAN1 setting for
remote access.
Reset to Factory Default: Click Reset to load the factory default settings of WHG CONTROLLER.
185