Table of Contents
Advertisement
10.5.3.
Marking APs on your Map
If you have several APs deployed and listed in List under Wide Area AP Management, their geographical location
can be marked on a particular map.
Firstly, go to the List tab page and click on the Edit button of the AP's that you wish to mark in the map. In the AP
configuration page, set the coordinates (Latitude and Longitude) of this AP and the radius of signal coverage.
Fill in the coordinates where you wish to mark this particular AP. Link 1 ~ Link 3 is for configuring a http link that will
show up in the dialogue box on the map for referencing additional information related to this AP, for instance the IP
address of a IP surveillance camera connected to this AP or the URL of the Venue Website where this AP is
deployed.
Administrator can upload customized thumbnail image shown in the map. After configuring all the necessary settings
and uploading your images, click Save button and return to AP List page.
Check the AP's that you wish to mark in the map and click the "Add to Map" button, choose the name of the map on
which you wish to mark these APs and click OK button.
160
Advertisement
Table of Contents
