Change Password - LevelOne WHG-311 User Manual

12.5. Change Password

Configure Change Password; go to: Utilities >> Password Change.
There are three levels of authorities: admin, manager or operator. The default usernames and passwords are as
follows:
Admin: The administrator can access all configuration pages of WHG CONTROLLER.
User Name: admin
Password: admin
Manager: The manager can only access the configuration pages under User Authentication to manage the user
accounts, but without permission to change the settings of the profiles of Firewall, Specific Route and Schedule.
User Name: manager
Password: manager
Operator: The operator can only access the configuration page of Create On-demand User to create new
on-demand user accounts and print out the on-demand user account receipts.
User Name: operator
Password: operator
The administrator can change the passwords here. Please enter the current password and then enter the new
password twice to verify. Click Apply to activate this new password.

Note: Only login with admin can change password.
If the administrator's password is lost, the administrator's password still can be changed through the text
mode management interface at the serial console port.
184