Package & Installation; Whg-707 Package & Installation - LevelOne WHG-311 User Manual


Ethernet Cable x 1

Straight-through Ethernet Cable x 1

Power Cord x 1

Rack Mounting Bracket (with Screws) x 1
It is highly recommended to use all the supplies in the package instead of substituting any components by
other suppliers to guarantee best performance.
 Installation
 Connect the power cord to the power socket on the rear panel.
 Turn on ( | ) the power switch on the rear panel. The Power LED should be on to indicate a proper connection.
 Connect an Ethernet cable to the WAN1 Port on the front panel. Connect the other end of the Ethernet cable to
an xDSL/cable modem, or a switch/hub of an internal network. The LED of this port should be on to indicate a
proper connection.
 Connect an Ethernet cable to the Mgmt Port on the front panel. Connect the other end of the Ethernet cable to
an administrator PC for configuring the system. Connect an Ethernet cable to the LAN1 or LAN2 Port on the
front panel. Connect the other end of the Ethernet cable to an AP for extending wireless coverage; a switch for
connecting more wired clients; or directly to a client PC. The LED of port should be on to indicate a proper
connection.
2.4.6. WHG-707 Package & Installation
 Package Checklist
The standard package of WHG-707 includes:

WHG-707 x 1

CD-ROM (with User's Manual and QIG) x 1

Quick Installation Guide (QIG) x 1

RS-232 DB9 Console Cable x 1

Ethernet Cable x 2

Power Cord x 1

Rack Mounting Bracket (with Screws) x 1
It is highly recommended to use all the supplies in the package instead of substituting any components by
other suppliers to guarantee best performance.
 Installation
1. Connect the power cord to the power socket on the rear panel.
2. Turn on the power switch on the rear panel.
3. Connect an Ethernet cable to the WAN1 Port on the front panel. Connect the other end of the Ethernet cable
to an xDSL/cable modem, or a switch/hub of an internal network. The LED of this port should be on to
indicate a proper connection.
4. Connect an Ethernet cable to the LAN Ports on the front panel; connect the other end of the Ethernet cable
20