11. Networking Features of a Gateway
11.1. DMZ
Configure DMZ; go to: Network >> NAT >> DMZ (Demilitarized Zone).
The system supports specific sets of Internal IP address (LAN) to External IP address (WAN) mapping in the Static
Assignments. The External IP Address of the Automatic WAN IP Assignment is the IP address of External Interface
(WAN1) that will change dynamically if WAN1 Interface is Dynamic. When Automatic WAN IP Assignments is
enabled, the entered Internal IP Address of Automatic WAN IP Assignment will be bound with WAN1 interface. Each
Static Assignment could be bound with the chosen External Interface, WAN1 or WAN2. There are specific sets of
static Internal IP Address and External IP Address available. Enter Internal and External IP Addresses as a set.
After the setup, accessing the WAN will be mapped to access the Internal IP Address. These settings will become
effective immediately after clicking the Apply button.
170