Monitor Ip - LevelOne WHG-311 User Manual

12.12. Monitor IP

rd
Configure Monitoring 3 Party IP; go to: Network >> Monitor IP.
WHG CONTROLLER will send out a packet periodically to monitor the connection status of the IP addresses on the
list. On each monitored item with a WEB server running, administrators may add a link for the easy access by
entering the IP, select the Protocol to http or https and then click Create. After clicking Create button, the IP
address will become a hyperlink, and administrators can easily access the host by clicking the hyperlink remotely.
Click the Delete button to remove the setting.
rd
Monitoring 3 Party AP, go to: Network >> Monitor IP.
rd
If you are using 3 party AP, you can use Monitor IP function to monitor the AP connection status. Because WHG
CONTROLLER can not manage these APs, Monitor IP is a better way to monitor the AP connection status.
WHG CONTROLLER will send out a packet periodically to monitor the connection status of the IP addresses on the
list. If the monitored IP address does not respond, the system will send an e-mail to notify the administrator that such
destination is not reachable. After entering the necessary information, click Apply to save the settings.
Click Monitor Now to check the current status of all the monitored IP. The system supports monitoring on 200 IP
addresses listed in the "Monitor IP List".
196