Lan Port & Service Zone Mapping - LevelOne WHG-311 User Manual

When both WAN1 and WAN2 are properly configured with uplink to the internet, WAN failover and Load Balancing
feature becomes available.
Load Balancing: Administrator can spread the system traffic across WAN1 and WAN2 ports based on percentage
load, calculated using session, bytes, or packets.
WAN Failover: Once enabled, whenever WAN1 is down, WAN2 will service the traffics originally handled by WAN1
until WAN1 link is up again and vice versa. This feature is not available to be used concurrently with Load
Balancing.
WAN Connection Detection
The system will periodically check to see if the Internet (uplink) connection is down by seeing if it can get responses
from three target sites.
Warning of Internet Disconnection: When check box is checked, the entered message will be displayed on clients'
web browser when outbound internet connection is down.
5.5. LAN Port & Service Zone Mapping
WHG Controllers support 2 types of VLAN modes, Port-Based and Tag-Based. Go to Main Menu > System > LAN
Port Mapping
41