Client Mobility - LevelOne WHG-311 User Manual

11.3. Client Mobility

Configure IP Plug and Play; go to: Network >> Client Mobility.
WHG CONTROLLER supports IP PNP function: users can login and access network with any IP address setting.
At the user end, a static IP address can be used to connect to the system. Regardless of what the IP address used
at the user end, authentication can still be performed through WHG CONTROLLER.

IP PNP: When IP PNP is enabled, a PC with a static IP address can still access the network even the system
enables built-in DHCP server. No TCP/IP reconfiguration is needed.

Cross Gateway Roaming: Configure this gateway to Master or Slave. In Master mode, you may also need to
input the Slave IP and Secret Key. In Slave Mode, input Master IP and Key.
Master Node: While configure Master Node, one master could active up to 15 Slave node setting.

Slave Node: While configure Slave Node, enter its master node setting.

172