User Access Control - LevelOne WHG-311 User Manual

7.2.

User Access Control

WHG Controller supports user access control per service zone, for the entire system, or per authentication server.
MAC Access Control per Service Zone
Go to Main Menu > System > Service Zones.
Each Service Zone's Wireless Settings will be applied to APs that are mapped to this service zone. There is a MAC
Access Control section where the administrator can specify up to 10 MAC addresses which can be allowed, denied
to access this service zone wirelessly.
Access Control – Status: Disable means there is no limitation as to what MAC address are allowed or not allowed
to access this service zone. Allowed means that only the MAC addresses listed are allowed to access this service
zone wirelessly. Denied means that the MAC addresses listed are not allowed to access this service zone wirelessly.
Each MAC entry can also be enabled or disabled on the list separately.
MAC Access Control for the entire system
Go to Main Menu > Users > Additional Control > MAC ACL.
The administrator can enter multiple MAC address entries by clicking the Add MACs button. This MAC ACL list is
enforced to the whole Controller. Allow means that only the MAC addresses listed are allowed to access the
Controller's network. Deny means that the MAC addresses listed are not allowed to access the Controller's network.
Disable means that this MAC ACL list is not enforced and that there is not restriction on MAC addresses on the
whole system.
Black List
Go to Main Menu > Users > Black List.
107