Table of Contents
Advertisement
12.13. Console Interface
Via this port to enter the console interface for the
administrator to handle the problems and situations
occurred during operation.
1. In order to connect to the console port of WHG
CONTROLLER, a console, modem cable and a
terminal simulation program, such as the Hyper
Terminal are needed.
2. If a Hyper Terminal is used, please set the parameters
as 9600, 8, None, 1, None.
The main console is a menu-driven text interface with dialog boxes. Please use arrow keys on the
keyboard to browse the menu and press the Enter key to make selection or confirm what you enter.
3. Once the console port of WHG CONTROLLER is connected properly, the console main screen will appear
automatically. If the screen does not appear in the terminal simulation program automatically, please try to press
the arrow keys, so that the terminal simulation program will send some messages to the system, where the
welcome screen or main menu should appear. If the welcome screen or main menu of the console still does not
pop up, please check the connection of the cables and the settings of the terminal simulation program.
197
Advertisement
Table of Contents
