Table of Contents
Advertisement
9.2.
Configure AP Template
Configure AP Template; go to: Access Points >> Enter Local Area AP Management >> Templates.
The system supports up to three templates which include configurations of APs. The administrator can configure the
setting together in the template instead of logging the AP management interface to set the configurations one by one.
Select the AP type (if available) and one of the three available templates, and then click Edit to have the Template
Editing page.
Input the template Name and Remark for easy reference and memorization. An easy way to configure a template is
to copy the configuration of an already configured AP to the template. Select the desired AP from Copy Setting's
From list and click apply to copy the selected AP's configuration to the template.
If copy is not desired, please select NONE then click the button of Configure to proceed with manual template
configuration.
Template Editing: The administrator can set the template configuration manually or copy the
configurations from a specific existing managed AP by Copy Settings From option. Click Configure
button to have detailed configurations.
Name: The name shown for this particular template.
Copy Settings From: Select a pre-configured existing AP and click Apply to save its settings as
the template settings.
Remark: The remark or additional information for this template profile.
Template Configuration
To configure a template manually please click the Configure button.
128
Advertisement
Table of Contents
