Rogue Ap Detection - LevelOne WHG-311 User Manual

9.11. Rogue AP Detection

Configure Rough AP Detection; go to: Access Points >> Enter Local Area AP Management >> Rogue AP
Detection.
It is designed to detect the non-managed or possibly malicious AP in the deployed environment. It takes the
managed APs as sensors to find out the non-managed AP even if the AP uses the same SSID with managed AP's. It
shows the AP's BSSID, ESSID, Type, Channel, Encryption, and found time.
1. Setup the Detection Interval
Configure Detection Interval; go to: Access Points >>Rogue AP Detection >>General Configuration.
Input a Detection Interval, if you input "0", it will "Disable" this function, and system will not enable the Rogue AP
Detection function.
2. Let the managed AP be the sensor
Configure Rogue AP Sensor; go to: Access Points >>Rogue AP Detection >>Sensor List Configuration.
Before setup the AP sensor, you must discovery the APs and apply template first.

Note: For more detail of AP Management, please refer to the section of Managing Wireless Network.
146