14.3. Site-to-Site VPN
Configure Site-to-Site VPN; go to: Network >> VPN >> Site-to-Site VPN.
WHG CONTROLLER support Site-to-Site VPN for more than 2 WHG CONTROLLER create VPN tunnel to each
other over the WAN network. For example, if there are 2 WHG CONTROLLER, you can create a VPN tunnel to let a
subnet of one WHG CONTROLLER to access the subnet of another WHG CONTROLLER.
First, you need to add a Remote Site with remote subnet.
The IPSec settings in both sites must be same.
And then create a Local Site with subnet for mapping to the remote site.
228