Telephone Operation; General; Originating Calls; Answering Calls - Mitel SX-200 Manual

5. TELEPHONE OPERATION

General

Originating Calls

Answering Calls

Terminating A Call

5.01
This Part describes basic telephone call handling. Part 6 de-
scribes additional features available with the
telephone.
5.02 To originate a call:
Pick up the handset,
or,
Press the SPEAKER key. The set selects the prime line. If the prime line
is busy, the set selects the first available outgoing line, starting from
the lowest line appearance key. If no line is available, the set remains
silent.
or
Proceed to the next step if Immediate Line Selection is enabled and a
Handsfree call is desired.
If other than the set's prime line is desired, press the appropriate Line
Appearance key.
Dial the number, press Redial or press the appropriate Speed Dial key,
if programmed.
5.03 To answer a call:
Lift the handset or press the SPEAKER key. The set automati-
cally selects the ringing line. If more than one line is ringing, the set
selects the lowest ringing line appearance key.
or
Press the Line Appearance key to be answered. The call is answered
Handsfree. If desired, lift and use the handset.
5.04 To terminate a call:
Hang up. If in Handsfree mode, press the SPEAKER key. If there
is a call on consultation hold, the call will ring the set.
SUPERSEJ
3DN
Page 13