Configurations; Modem Interconnect - Mitel SX-200 Manual

3.

CONFIGURATIONS

General
3.01
describes different configurations that can be set up within the cabi-
net. Configurations are restricted only by the 35 inch height limit of the
19 inch rack and the total heights of the equipment being installed on
it. The DATASHELF 9100 is 8.75 inches high, and the Modem Intercon-
nect Panel is 3.5 inches high. Part 4 contains instructions for installing
the
Chart 4-l.
3.02 The DATACABINET 9000, configured with three DATASHELF
in Figure 2-1.
3.03
are to be brought into the cabinet.
3.04
3.05
Equipment
Configuration
A DATASHELF 9100 and a Modem lnterconnnect Panel are avail-
able for mounting within the DATACABINET 9000. This Part
DATACABINET 9000;
9100 assemblies and one Modem Interconnect Panel, is shown
Equipment within the DATACABINET 9000 is to be powered only
from the internal ac distribution panel. No external ac line cards
The DATACABINET 9000 must always have the fan unit installed
in the bottom of the cabinet.
Table 3-1 lists the possible configurations which will be avail-
able for a DATACABINET 9000.
CONFIGURATIONS AVAILABLE IN A DATACABINET 9000
DATASHELF 9100
instructions for installing
TABLE 3-l
Interconnect
each shelf are in
Modem
Panel
Page 7