Introduction; Available Literature; Frequency Converter Identification - Danfoss vlt FC 102 Operating Instructions Manual

®
VLT HVAC Drive Operating Instructions

2. Introduction

2.1. Introduction

2.1.1. Available Literature

- Operating Instructions MG.11.Ax.yy provide the neccessary information for getting the frequency converter up and running.
- Design Guide MG.11.Bx.yy entails all technical information about the frequency converter and customer design and applications.
- Programming Guide MG.11.Cx.yy provides information on how to programme and includes complete parameter descriptions.
- Mounting Instruction, Analog I/O Option MCB109, MI.38.Bx.yy
- VLT ® 6000 HVAC Application Booklet, MN.60.Ix.yy
-
Operating Instructions VLT
- Operating Instructions VLT
-
Operating Instructions VLT
- Operating Instructions VLT
-
Operating Instructions VLT
-
Operating Instructions VLT
x = Revision number
yy = Language code
Danfoss technical literature
+Documentation.htm
.

2.1.2. Frequency Converter Identification

Below is an example of an identification label. This label is situated on the frequency converter and shows the type and options fitted to the unit. See
table 2.1 for details of how to read theType code string (T/C).
Illustration 2.1: This example shows an identification label.
® HVAC Drive BACnet, MG.11.Dx.yy
® HVAC Drive Profibus, MG.33.Cx.yy.
®
HVAC Drive Device Net, MG.33.Dx.yy
® HVAC Drive LonWorks, MG.11.Ex.yy
®
HVAC Drive High Power, MG.11.Fx.yy
® HVAC Drive Metasys, MG.11.Gx.yy
is also available online at
MG.11.A6.02 - VLT ® is a registered Danfoss trademark
www.danfoss.com/BusinessAreas/DrivesSolutions/Documentations/Technical
2. Introduction
2
9